Table of Contents
Advertisement
ICON I100 INSTALLATION INSTRUCTIONS
Remove the smoke shield by removing five screws (starting from one side: remove two , skip one, remove one,
skip one, remove two). See Figures 15 and 16.
Figure 15 - Removing the Smoke Shield
Figure 16 - Removing the Smoke Shield
Position the refractory. Position the bottom of the back refractory to the back of the fireplace and center from side
to side. See Figure 17. Be sure to position it so the retainer notch is at the top. Fasten in place with the
refractory retainer and screws provided. See Figure 18.
Figure 17 - Installing Back Refractory
Figure 18 - Attaching Back Refractory
12/03
35144 Rev E
15
Hide quick links:
Advertisement
Table of Contents
