Table of Contents
Advertisement
For a DELL PC mini tower type
Board spacer (metal type)
twist-tab wire
Pass the twist-tab wire through a hole of the guide rails as shown above.
Use the twist-tab wire to secure the board spacer to the guide rails inside the computer.
Twist the twist-tab wire and secure it properly.
Check that the board spacer has been secured properly.
Connect the ground wire to the computer's chassis only when the metal type of board spacer is supplied.
(Refer to page 11)
The type of the SDI board (Video compression board)
The SDI board comes in two types.
Type 1 : You can find the LSI printed "GENNUM", turning over the insulating sheet.
Type 2 : You can find the LSI printed "ALTERA FLEX", turning over the insulating sheet, or the one different from
the type 1.
Install the proper software for each type of the SDI board.
Type 1 has no analog audio monitor
Select it for installing "TARGA DV2000 SDX".
Type 2 has analog audio monitor
Select it for installing "TARGA DV2000 SDX V2".
59
Guide rail
twist-tab wire
Insulating sheet
Board spacer (plastic type)
Guide rail
SDI board
Advertisement
Table of Contents
