Table of Contents
Advertisement
6. Appear Configuration menu window.
Select "SCSI Device Configuration", and press
[Enter] key.
7. Appear Device configuration window.
In all SCSI ID (from #0 to #15) ,Change 40.0(from
20.0) at Maximum Sync Transfer Rate.
At Each SCSI ID ,move cursor to 20.0 and press
[Enter] key.
Appear all useable number, select 40.0 and press
[Enter] key.
Please change about all SCSI ID.
17
8. When finish to change about all SCSI ID, press
[ESC] key 2 times.
Appear confirmation message.
Select "Yes", and press [Enter] key.
Finish for channel A.
9. Press [ESC] key.
Select channel B and change same as channel A.
10. Finish setting for channel B(finish Item 8), press
[ESC] key 2 times.
Appear message of finish.
Select "Yes", and press [Enter] key.
11. Appear "Please press any key to reboot", press any
key.
Setting is finish and auto reboot.
Advertisement
Table of Contents
