Panasonic AY-RP500 Installation Manual page 43

Install an Application Program
1. Connect the keyboard, mouse, and personal com-
puter monitor to the personal computer, and turn on
the power switches on the peripheral equipment and
then on the personal computer. Windows NT starts
up.
2. Insert the CD-ROM supplied with the software pack-
age into the CD-ROM drive.
3. Click .
Start
Click "Run" on the start menu. The "Run" window
now opens.
4. Input "CD-ROM drive name:\dvedit\disk1\setup.exe"
in "Open:" and click
OK
ROM drive is drive d:, input the series of character
as shown above.
To check the letter assigned as the CD-ROM drive,
click "My Computer." The CD-ROM drive letter will
appear on the screen.
5. The Welcome window appears.
Click Next .
6. The User Information window appears.
Name: . . . . . Enter your name.
Company:. . Enter your company's name.
Serial: . . . . . Enter the product ID number printed
on the label affixed to the case of the
CD-ROM. Input all eight letters and all
eight digits (and do not omit the "-").
When all items have been entered,
click Next
41
. If, for instance, the CD-
.
7. The Choose Destination Location window appears.
Click .
Next
8. The TARGA Product Information window appears.
Select the type of video compression board to use,
and click Next .
For analog type, select "TARGA DV2000".
For SDI type, select "TARGA DV2000 SDX".
For SDI Voyager 2, select "TARGA DV2000 SDX V2".
(When the type is selected,
Refer to Appendix (The type of the SDI board) about
the type of the board.
9. The A/V Hard Disk Information window appears.
Enter the number of hard disk drives for video use.
To select two hard disk drives for video use, enter 2
at the Drives: prompt.
To select four hard disk drives for video use, enter 4
at the Drives: prompt.
After entering the number of drives, click
Note: Here, two or four hard disks can be set for
video use. To use more hard disks, start up the
application after setting it up, and use a utility.
10. The A/V Hard Disk Information window is still dis-
played.
Enter the name of the hard disk drives for video use.
To select two hard disk drives for video use:
Enter O: at the Drive 1: prompt, and click
Enter P: at the Drive 2: prompt, and click
To select four hard disk drives for video use:
Enter O: at the Drive 1: prompt, and click
Enter P: at the Drive 2: prompt, and click
Enter Q: at the Drive 3: prompt, and click
Enter R: at the Drive 4: prompt, and click
11. The A/V Hard Disk Information window is still dis-
played.
Enter the name and directory of the hard disk drives
for audio use. The default is g for the drive name,
and audiopools for the directory. Just modify the
drive name.
For example, to select drive d for the hard disk drive
for audio use, enter d:\audiopools. Then click
is displayed.)
Next .
Next .
Next .
Next .
.
Next
.
Next
Next .
Next .