Auto Detect Hard Disk; Save & Exit Setup; Exit Without Saving - Advantech PCM-4825 User Manual

4.2.10 Auto detect hard disk

The IDE HDD AUTO DETECTION utility can automatically detect the IDE
hard disk installed in your system. You can use it to self-detect
and/or correct the hard disk type configuration.
HARD DISK TYPE
Primary master:
4.2.11 Save & exit setup
If you select this option and press <Enter>, the values entered in
the setup utilities will be recorded in the chipset's CMOS memory.
The microprocessor will check this every time you turn your system
on and compare this to what it finds as it checks the system. This
record is required for the system to operate.

4.2.12 Exit without saving

Selecting this option and pressing <Enter> lets you exit the Setup
program without recording any new values or changing old ones.
40 PCM-4825/4825L User's Manual
ROM ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
SIZE CYLS.
(MB) 790
Select Secondary Slave Option (N=Skip): N
Figure 4-8: IDE HDD auto detection screen
HEADS PRECOMP
15 65535
ESC = SKIP
LANDZ SECTORS MODE
789 57