5.8.5 Installation notes
1. During the installation of this driver, DISPLAY.LOG and
DSPINSTL.LOG files are created in \OS2\INSTALL directory.
These files identify the OS/2 system files that were updated and
indicate whether the installation was successful. The
DISPLAY.LOG file also contains a string which identifies the
version of driver that was installed. This information may be
important when reporting an installation problem.
2. During installation, DSPINSTL will invoke the SVGA Configu-
ration program SVGA.EXE to determine the hardware configu-
ration, and create the file \OS2\INSTALL\SVGADATA.PMI. If
this file is not created, the adapter will not be supported. When
this step is done, the display will be blanked, and you may see a
series of flashes on the display, and what appears to be a "cor-
rupted" display. This is normal, as the configuration process is
doing Video BIOS mode sets to determine which screen resolu-
tions BIOS supports. This configuration information is then used
to provide the System-Settings Resolution and Refresh selec-
tions.
52
PCM-4825/4845L User's Manual