5.2 Installation
Disk 1:
Disk 2:
Disk 3:
5.3 Simultaneous display mode
The 65550 VGA BIOS supports monochrome LCD, EL, color TFT
and STN LCD flat panel displays. It also supports interlaced and
non-interlaced analog monitors (VGA color and VGA
mono-chrome) in high-resolution modes while maintaining
complete IBM VGA compatibility. Digital monitors (i.e. MDA,
CGA, and EGA) are NOT supported. Multiple frequency (multi-
sync) monitors are supported as analog monitors.
Both CRT and panel displays can be used simultaneously. The
PCM-4825/4825L can be set in one of three configurations: on a
CRT, on a flat panel display, or on both simultaneously. The system
is initially set to simultaneous display mode. In the utility diskette,
there are three .COM files which can be used to select the display.
Simply type the filename at the DOS prompt:
CT.COM Enables CRT display only
FP.COM Enables panel display only
SM.COM Enables both displays at the same time.
5.4 Sleep mode
The utility diskette contains two files that support sleep mode.
Simply type the filename at the DOS prompt:
ON.COM switches to normal display mode.
OFF.COM switches to sleep mode.
Windows 3.1 driver
Windows 95, Windows NT drivers
OS/2 drivers
Chapter 5 SVGA Setup
43