ADEMCO Vista-10SE Installation And Setup Manual page 72

VISTA-10SE Installation and Setup Guide
02 Start: Zn List
No List
02 Start: Zn Typ
Not Used
02 Stop: Zn List
No List
02 Stop: Zn Typ
Not Used
02 A EV ZL ZT
STT 0 0 0 00
02 A EV ZL ZT
STP – – 0 00
16–4
If a zone list will be used to START the relay action, enter the zone list
number (to be programmed in field 81): 1, 2, or 3. If not used, enter 0.
0
Press the [ ] key to continue.
If a zone type or system operation will be used to START the relay
action, enter the appropriate two-digit code (see table that follows). If
00
not, enter 00. Press the [ ] key to continue.
00 = Not Used
01 = Entry/Exit
03 = Perimeter
04 = Interior Follower
20 = Arming–STAY
21 = Arming–AWAY
22 = Disarming (Code + OFF)
31 = End of Exit Time
32 = Start of Entry Time
If a zone list will be used to STOP, or restore, the relay action, enter the
zone list (ZL) number 1, 2, or 3 (to be programmed in 81 mode). If not
0
used, enter 0.
Press the [ ] key to continue.
If a zone type or system operation will be used to STOP the relay action,
enter the appropriate two digit code (see the "ZT" choices listed above). If
00
not, enter 00. Press the [ ] key to continue.
This screen again displays a summary of the current relay START
programming.
Press the [ ] key to continue.
This screen again displays a summary of the current relay STOP
programming. Press the [ ] key to continue.
The display then returns to the first screen so that the next relay number to
be programmed can be entered, unless you enter [0][0] to end relay
programming.
Previously entered data can be reviewed by pressing [#] [8] [0]. After the relay
number is chosen, press [ ] to go to the next screens. This is a review mode
only, and data cannot be changed.
WWW.DIYALARMFORUM.COM
CHOICES FOR ZONE TYPES
05 = Trouble Day/Alarm Night 08 = 24-Hr Aux
06 = 24-Hr Silent
07 = 24-Hr Audible
CHOICES FOR SYSTEM OPERATION
33 = Any Burglary Alarm
34 = Code + # + 7 Key Entry
35 = Code + # + 8 Key Entry
36 = At Bell Timeout**
38 = Chime
**Or at Disarming, whichever occurs earlier.
09 = Fire
10 = Interior w/Delay
39 = Any Fire Alarm
40 = Bypassing
41 = AC Power Failure
42 = System Low Bat
58 = Duress