ADEMCO Vista-10SE Installation And Setup Manual page 51

A 10-digit code is sent to the pager that is coded in the following format:
4-digit Subscriber No. SSSS–EEE–NNN 3-digit User or Zone No.
(as entered in field 43)
3-Digit Event Code (EEE), as follows:
911 = Alarm (NNN = Zone No.)
001 = Open, System disarmed (NNN = User No.)
002 = Close, System armed ( NNN = User No.)
811 = Trouble ( NNN = Zone No.)
NOTE: The first digit of the Subscriber No. entered in field 43 must be 1–9
(do not use 0); the last 3 digits can be 0–9. Failure to observe this
requirement may interfere with paging services.
Example 1. Pager displays:
This indicates that Subscriber No. 1234's system is reporting an
Alarm (911), due to zone 4 being faulted (004).
Example 2. Pager displays:
This indicates that Subscriber No. 1234's system is reporting an
opening (001) by User 5 (005).
Note that no Restore Reports are sent to the pager.
Important: AAV should not be used when Paging or Alarm Reports are
being sent to a secondary number. If this is done, the call to the secondary
number by the communicator after the Alarm Report will prevent the AAV
from taking control of the telephone line, and the AAV "Listen in" session
cannot then take place.
48 15-SECOND DIALER DELAY (BURGLARY)
If selected, will provide 15-second delay of Burglary Alarm Report to
the central station. Allows time for subscriber to avoid a false alarm
transmission.
0 for no delay, or 1 for 15-second delay.
49 PERIODIC TEST REPORT
Select the desired test report interval.
0 = none; 1 = 24 hours; 2 = weekly; 3 = 30 days.
Test Report code entered in field 64 is sent; reports with Subscriber
No.
UL installations: 24 hours (1) must be selected.
50 SESCOA/RADIONICS SELECT
0 = Radionics (0–9, B–F reporting)
1 = SESCOA (0–9 only reporting)
Select 0 for all other formats.
51 CONFIRMATION OF ARMING DING (1-Digit Entry)
Enter 1 to enable 1/2-second external alarm sounding "ding" when
closing report goes in, or at the end of exit delay. Enter 2 for alarm
sounding ding with RF arming (this will work with either a button RF
unit or a 5827).
0 disables the "ding."
WWW.DIYALARMFORUM.COM
Section 14 – Data Field Descriptions
1234–911–004
1234–001–005
(1-Digit Entry)
(1-Digit Entry)
1-Digit Entry
14-5