Define The Default Job Settings; Define The Ip Address Information - Oce 31x5e Maintenance Manual

Define the default job settings

Define the IP address information

Introduction
To configure the IP address information, you can use the Key Operator System
and the Océ System Configuration.
You can configure the IP address statically or dynamically through BootP or
DHCP.
When selecting the address assignment, use one of the following settings:
Address assignment
'Manual'
'Use DHCP'
'Use BootP'
Before you begin
Enter the Key Operator System.
1.
Illustration
[9] Obtain the IP address
[9] Obtain the IP address
26 Océ 31x5E Configuration and Maintenance Manual
Result
The IP address must be manually entered in the 'IP
address' function box. 'Manual' is the default set-
ting.
DHCP is used to obtain the IP address.
BootP is used to obtain the IP address.