Checking The Speedometer Gear Unit - Yamaha YJ50RN Service Manual

FRONT WHEEL AND BRAKE
2
1
5. Replace:
• oil seal
New
• wheel bearings
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Clean the outside of the front wheel hub.
b. Remove the oil seal 1 with a flat-head
screwdriver.
NOTE:
@
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings 3 with a gen-
eral bearing puller.
d. Install the new wheel bearings and oil seal
in the reverse order of disassembly.
CAUTION:
@
Do not contact the wheel bearing inner race
4 or balls 5. Contact should be made only
with the outer race 6.
NOTE:
@
Use a socket 7 that matches the diameter of
the wheel bearing outer race and oil seal.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS00535
CHECKING THE SPEEDOMETER GEAR
UNIT
1. Check:
• speedometer drive gear
Damage/wear → Replace.
4 - 6
CHAS
New
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼▼▼
▲▲▲