Wall Mounting - Aastra Office 80IP A150 User Manual

Wall mounting

You can also mount the phone on the wall. To do so, screw the stand rest onto the wall as a
bracket and hook the phone onto the stand rest.
Notes:
• As there is only a limited amount of space between the sockets on the back of the phone and the wall
on which it is mounted, you need to use a ribbon cable with a short connector for the cord. Ask your
dealer for a list of suppliers for a suitable ribbon cable.
• You can only connect one Office KBM expansion keypad (option) if the phone is wall-mounted.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset cord and the phone cod to the phone (Figure B). For the correct con-
nection assignment refer to the Chapter
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (Figure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
3.5 mm
1
Installation and First-Time Operation
151 mm
2
C
"Connecting the phone",
A
B
78.
1
2
3
D
77