Table of Contents
Advertisement
Priority
Formulating Functions
This section explains how to activate an individual function, for example call forwarding uncondi-
tional, with the aid of function commands and how to assign it to a key.
Function Commands
You can use function commands to define a function to suit your personal requirements. A
function can consist of one or more function commands, function codes, and the phone
number. You can either carry out a function directly or store it under a function key (select
figurable
function).
Tab. 1
The following function commands are available:
"A"
"I"
"X"
"P"
"Lxx"
"N"
"."
"Z"
"R"
"Y"
Notes:
• The
Handset
and
Hands-free
activated.
• If you select answer using
Priority, with 1 being the highest priority, and 8 the lowest:
Setting the priority:
Select the priority you want from 1 to 8 and confirm with the
The setting is stored.
Seize line with highest priority
Seize line
Disconnect
Pause 1 second before the next operation
Seize line xx (Line keys)
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line.
Personalizing Your Phone
settings only work when the ringing signal is
Handset
or Hands-free, you must also specify the
Ok
Foxkey.
con-
69
Advertisement
Table of Contents
