Table of Contents
Advertisement
Location
and Function
of Controls
113.198611
113.198411
On/Off Switch
The on/off switch turns the power to the saw
on and off.
To turn the saw on, put the yellow key into
the red switch and then pull the switch to the
right. To turn the saw off, push the red switch
to the left. Remove
the yellow key from the
red switch whenever
the saw is turned
off, and
keep it out of the reach and sight of children.
(Figure
86)
WARNING:
The saw can start ac-
cidentally
or be used by children
and
others when the yellow key is left in the
red switch. Always
remove the yellow
key when the saw is off, and keep it out
of the reach and sight of children.
'_
WARNING:
The saw will start im-
mediately
when the power
comes
back
on after a blackout
if the red switch is
left on. Always turn the switch off and
remove the yellow key when the power
goes off for any reason.
Miter
Lock
The miter lock is used to hold the radial arm
at various
angles to the fence.
To unlock the miter lock, pull the lock to the
right. (Figure 87)
Fig. 86 - On/Off Switch
....
31
Advertisement
Table of Contents
