Craftsman 113.198411 Operator's Manual page 58

Crosscutting
r
Crosscutting is used to cut a workpiece to
length. The work_iece is held against the
fence. The saw blade is pulled through the
workpiece. Cuts are usually made across the
grain of the workpiece.
Types of Crosscuts
The basic types of crosscuts are shown below.
Notice the hand and body position in each.
Fig. 136 Straight Crosscut
Fig. 138 Bevel Crosscut
Fig. 139 Compound Crosscut
Miter
Straight
Fig. 140 Basic Crosscuts
Bevel
Compound
Fig. 137 Miter Crosscut
58