Table of Contents
Advertisement
Connections and Setup
2 Preparation
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
2.1.1 Base unit
1 Telephone line cord
L Connect to a single telephone line jack (RJ11C).
2 Power cord
L Connect to a power outlet (120 V, 60 Hz).
1
Note:
L To avoid malfunction, do not position the fax machine
near appliances such as TVs or speakers which
generate an intense magnetic field.
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
Using surge protectors
L The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (3).
If the fax machine shares a single telephone line with
a DSL service
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Call Display (page 27) may not
function properly. A filter to prevent this is provided by
2
3
your provider. Please attach the filter (4) to the
telephone line cord of the unit.
2.1.2 Charger unit
1 Hooks
L Fasten the AC adaptor cord to prevent it from
being disconnected.
2 AC adaptor
L Connect to the power outlet (120 V, 60 Hz).
2
Note:
L USE ONLY WITH the included Panasonic AC
adaptor.
L The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
L The AC adaptor should be connected to a vertically
oriented or floor-mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become
disconnected.
2. Preparation
4
1
15
Advertisement
Table of Contents
