Table of Contents
Advertisement
8.3 Basic features
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
Feature
Setting the quick setup
Setting the date and
time
Setting your logo
Setting your fax
number
Printing a confirmation
report
Changing the ring
count in FAX ONLY
mode
Changing the ring
count in TAM/FAX
*1
mode
Changing the maximum
recording time for
*1
incoming messages
Feature code
Selection
{1} "TAM/FAX" (default)
{#}{0}{0}
{2} "DIST. RING"
{3} "TEL ONLY"
{4} "FAX ONLY"
See page 17 for details.
Enter the date and time using the dial keypad. See page 19 for
{#}{0}{1}
details.
Enter your logo using the dial keypad. See page 20 for details.
{#}{0}{2}
Enter your fax number using the dial keypad. See page 21 for
{#}{0}{3}
details.
{0} "OFF": Confirmation reports will not be printed.
{#}{0}{4}
{1} "ON": A confirmation report will be printed after every fax
transmission.
{2} "ERROR" (default): A confirmation report will be printed only
when a fax transmission fails.
{1} "1"
{#}{0}{6}
{2} "2"
{3} "3" (default)
{4} "4"
Note:
L Set feature #77 to "FAX ONLY" (page 53) beforehand.
{0} "TOLL SAVER"
Base unit:
{2} "2" (default)
{#}{0}{6}
{3} "3"
{4} "4"
See page 37 for details.
Note:
L Set feature #77 to "TAM/FAX" (page 53) beforehand.
{0} "Toll saver"
Cordless
handset:
{2} "2" (default)
{3} "3"
{0}{6}{1}
{4} "4"
See page 37 for details.
{0} "GREETING ONLY": The unit plays the greeting message but
Base unit:
does not record any incoming messages.
{#}{1}{0}
{1} "1 MIN": 1 minute
{2} "2 MIN": 2 minutes
{3} "3 MIN" (default): 3 minutes
{0} "Greeting only": The unit plays the greeting message but
Cordless
handset:
does not record any incoming messages.
{1} "1min": 1 minute
{0}{6}{2}
{2} "2min": 2 minutes
{3} "3min" (default): 3 minutes
8. Programmable Features
47
Advertisement
Table of Contents
