Table of Contents
Advertisement
10. Help
Display
"MODEM ERROR"
"NO FAX REPLY"
"NO ITEMS STORED"
"OPEN CABINET
CHECK FILM SLACK"
"OPEN CABINET
CHECK FILM TYPE"
"PAPER JAMMED"
"PHONEBOOK FULL"
"PLEASE WAIT"
"RECORDING ERROR"
"REDIAL TIME OUT"
"REMOVE DOCUMENT"
"SERIAL ERROR"
"TRANSMIT ERROR"
"UNIT OVERHEATED"
10.2.2 Cordless handset
Display
"Busy"
"Error!!"
"---Incomplete---
Phonebook full"
"No items stored"
58
Cause & Solution
L There is something wrong with the unit's modem. Contact our service
personnel.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L You tried to copy your phonebook items to the cordless handset, but your
phonebook was empty.
L Please use genuine Panasonic replacement film (page 7).
L The ink film is slack. Tighten it (see step 5 on page 11).
L The fax machine is positioned near appliances such as TVs or speakers
which generate an intense magnetic field.
L A recording paper jam occurred. Remove the jammed paper (page 65).
L You forced the recording paper into the paper tray too strongly. Remove all
of the installed paper, and re-install it gently.
L There is no space to store new items in the phonebook. Erase unnecessary
items (page 25).
L The phonebook memory of the cordless handset is already full, or became
full when copying phonebook items. Copying was stopped. Press {STOP}
to exit the mode. Erase other stored items in the cordless handset
phonebook (page 25), then try again.
L The unit is checking that there is no slack or crease in the ink film. Wait for
a moment while the check is completed.
L You recorded your greeting message or memo message less than 1 second
in length and recording has failed. Try again.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L The document is jammed. Remove the jammed document (page 66).
L Press {STOP} to eject the jammed paper.
L There is something wrong with the unit and the base unit will not work.
Contact our service personnel.
L A transmission error occurred. Try again.
L If you are sending a fax overseas, try the following:
– Make sure the other party's number is a fax number.
– Use the overseas transmission mode (feature #23 on page 49).
– Add 2 pauses at the end of the telephone number or dial manually.
L The unit is too hot. Stop using the unit for a while and let the unit cool down.
Cause & Solution
L The called base unit or another cordless handset is in use.
L When you tried to register the cordless handset, the cordless handset and
the base unit could not link for some reason, such as interference from
electrical appliances. Move the cordless handset and the base unit away
from the electrical appliances and try again.
L The destination unit's phonebook memory is full. Erase unnecessary items
from the destination unit's phonebook (page 25).
L Your phonebook or redial list is empty.
Advertisement
Table of Contents
