Table of Contents
Advertisement
8. Programmable Features
Feature
Setting the ring pattern
for fax (Distinctive Ring
feature)
Setting the time
adjustment
Setting the quick scan
Receiving oversized
documents
50
Feature code
Selection
{1} "A"
{#}{3}{2}
{2} "B"
{3} "C"
{4} "D"
{5} "B-D" (default)
See page 39 for details.
Using this feature, the unit's date and time setting will be
{#}{3}{3}
automatically adjusted when caller information is received.
{0} "MANUAL": Deactivates this features.
{1} "AUTO" (default): The date and time setting will be
automatically adjusted.
This feature is helpful when you want to remove the document for
{#}{3}{4}
other uses, because the unit will release the document before
sending or copying.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The unit will scan the document and store it into
memory first, then the unit will start sending or copying the
documents.
Note:
L If the document exceeds the memory capacity, sending of the
whole document or copying of the exceeded document will be
cancelled and this feature will be turned OFF automatically.
If the size of the document sent by the other party is as large as
{#}{3}{6}
or larger than the recording paper, the unit can reduce the
document and print it. Select the desired reduction rate.
{1} "72%"
{2} "86%"
{3} "92%" (default)
{4} "100%"
Note:
L The information of the sending party is printed on the top of
each page. Therefore, even if the original document is the
same size as the recording paper, the document will be
divided into 2 sheets when printed at "100%". Select "92%" to
print on 1 sheet.
Setting
Recording
paper size
"100%"
Letter
"92%" (default)
Letter
"86%"
Letter
"72%"
Letter
Original
document size
Letter
Letter
A4
Legal
Advertisement
Table of Contents
