Table of Contents
Advertisement
04/02 Rev. 2.15-01
Operation
ON / OFF
FEED
CUT
POWER
ERROR
DATA
Connecting to a computer / starting
1. Connect interface cable from computer to the printer. Switch on the printer,
the green LED glows (LED = small, round light emitting element).
2. By depressing the ON/OFF key, the printer is switched to „ONLINE mode",
the yellow LED glows and the printer is ready to receive data and to print
labels.
Functions of display keys
– Switch to the ONLINE or OFFLINE mode. ONLINE mode is indicated by
the yellow LED, the unit is ready to receive data.
– Control break of a print job, the yellow LED flashes fast - rest quantity!
– If an error is indicated (red LED) the error will be confirmead after its cor-
rection by depressing the ON/OFF key.
– In the OFFLINE mode a material feed can be advanced. At punched ma-
terial one label length is advanced, continous material is transport as long
as FEED-key is operated.
– If an error is indicated the error code may be called off via the yellow LED
– The controlled break of a current print job will be cancelled.
Reserved for optional functions.
Functions of LED elements
The operation panel shows 3 LED's in order to indicate the operation modes.
(Green) This LED glows, if printer is switched on.
(Red) Indication of an error (end of media........)
(Yellow) LED glows if printer is switched to ONLINE mode.
– LED flashes if unit prints, receives data or generates an image.
– LED flashes fast if current print job is interrupted - rest quantity!
– Indication of error code with 5 short/long flash signals called off by pressing
the FEED key.
MANUAL
TTX 207 – Da Capo
Setup, Operation, Service, page 6
Advertisement
Table of Contents
