Table of Contents
Advertisement
Quick Links
04/02 Rev. 2.15-01
Setup, Operation, Service
General notes ............................................... 2
Before using the printer.... ......................... 2
Copyright ................................................... 2
Initiation ......................................................... 3
Unpacking the printer ................................ 3
Setting up and connecting the printer ....... 3
Connections .................................................. 4
Insertion/removal of material ......................... 5
Operation ...................................................... 6
Connecting to a computer / starting .......... 6
Functions of display keys .......................... 6
Functions of LED elements ....................... 6
Adjustment of DIP switches ...................... 7
Maintenance and care .................................. 8
Changing and cleaning the printhead ....... 8
Cleaning the feed roller ............................. 9
Cleaning of gap sensor ............................. 9
Cleaning of material guiding parts ............. 9
Label material ............................................. 10
MANUAL
TTX 207 - Da Capo
Trouble shooting ..........................................11
Status Printout ............................................. 13
Sensor Check Routine ................................13
Access to routine .....................................13
Gap sensor ..............................................13
Micro switch/printhead lever ....................13
Material end sensor .................................13
Technical Specifications ..............................14
Anhang / Appendix ......................................16
Zeichensatztabelle / Font table ................16
17
Interne Fonts / Internal fonts ....................18
Index ............................................................22
Page 1
Advertisement
Table of Contents
Related Manuals for Avery Dennison TTX 207
Summary of Contents for Avery Dennison TTX 207
-
Page 1: Table Of Contents
04/02 Rev. 2.15-01 MANUAL Page 1 TTX 207 – Da Capo Setup, Operation, Service General notes ..........2 Trouble shooting ..........11 Before using the printer......2 Status Printout ..........13 Copyright ........... 2 Sensor Check Routine ........13 Initiation ............3 Access to routine ........13... -
Page 2: General Notes
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 2 TTX 207 – Da Capo General notes Before using the printer..The following warning hints and precautions contained in these Operating In- structions must be strictly observed. This will considerably contribute to the safe and expert operation of your printer. -
Page 3: Initiation
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 3 TTX 207 – Da Capo Initiation Unpacking the printer 1. Remove top foamed packing. 2. Take printer out of cardboard box. For carrying your printer, take it by the base plate. -
Page 4: Connections
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 4 TTX 207 – Da Capo Connections All connectors are located at the rear side. A Centronics or alternatively a serial V.24/DB 25 (RS232) interface interface is integrated. Before connecting/disconnecting the interface cable and the stacker switch „OFF“... -
Page 5: Insertion/Removal Of Material
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 5 TTX 207 – Da Capo Insertion/removal of material CAUTION! Danger of pulling in and tearing off of hair, jewellery, loose clothing, etc.! – Don´t let long hair, loose sleeves, jewellery, etc. hang into the printer! 1. -
Page 6: Operation
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 6 TTX 207 – Da Capo Operation Connecting to a computer / starting 1. Connect interface cable from computer to the printer. Switch on the printer, the green LED glows (LED = small, round light emitting element). -
Page 7: Adjustment Of Dip Switches
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 7 TTX 207 – Da Capo Adjustment of DIP switches Left of the mains plug there are located 8 DIP switches (Fig. 1) with which the parameters may adjusted as follows. A modification of a DIP switch position will be effictive after newly switching „ON“... -
Page 8: Maintenance And Care
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 8 TTX 207 – Da Capo Maintenance and care Carefull and regular maintenance will raise the performance and longevity of the printer, especially that of the printhead. Generally regard: Keep any dirt out off the print module! Remove any deposits of paper, adhesive and pre- print colors off the printhead, feed roller and gap sensor periodically. -
Page 9: Cleaning The Feed Roller
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 9 TTX 207 – Da Capo Cleaning the feed roller 1. Switch unit off and pull off mains plug!< D> 2. Remove material. 3. Remove insertion plate by loosen two knurled screws below the plate. -
Page 10: Label Material
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 10 TTX 207 – Da Capo Label material The printer is designed for thermal direct printing. The label material should be of low abrasive behaviour of the surface structure and low start tempera- ture for the colour development. -
Page 11: Trouble Shooting
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 11 TTX 207 – Da Capo Trouble shooting Errors during operation are indicated by means of the red LED at the opera- tion panel. By pressing the FEED key an error code may be called off via the yellow LED in order to recogneize the kind of error. - Page 12 04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 12 TTX 207 – Da Capo LED-Code Error Measure O – – O – Speedo Error Call service technician • Tab. 1: Blink codes of the yellow LED ( = short lighting up, – = long lighting up).
-
Page 13: Status Printout
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 13 TTX 207 – Da Capo Status Printout Status printout for indication of internal data and print test. Please use mate- rial with width of appr. 100 mm width. Access to status Press and keep pressed ON/OFF key for 3 seconds.Simultaneously switch... -
Page 14: Technical Specifications
04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 14 TTX 207 – Da Capo Technical Specifications Print Technologie Thermal Direct Print with Thickfilm Printhead Resolution 8 Dots/mm - Standard Print Width 104 mm Emulation EasyPlug Print Speed 100 mm/s (approx. 4“/s) - Page 15 04/02 Rev. 2.15-01 MANUAL Setup, Operation, Service, page 15 TTX 207 – Da Capo Mains frequency 50 Hz Fuse 230 V - 1.6 A slowblow 115 V - 2.5 A slowblow Power consumption max. 200 W Ambient conditions Operating temperatur: + 5 to + 35 °C Storage temperatur: -20 to + 70 °C...
-
Page 16: Anhang / Appendix
04/02 Rev. 2.15-01 BEDIENUNGSANLEITUNG / MANUAL Fonts, bar codes, Seite/Page 15 TTX 207 – Da Capo Anhang / Appendix Zeichensatztabelle / Font table... -
Page 17: Linien Und Rechtecke / Lines And Rectangles
04/02 2.14-01 BEDIENUNGSANLEITUNG , Seite / page 16 TTX 207 – Da Capo Linien und Rechtecke / Lines and rectangles... -
Page 18: Interne Fonts / Internal Fonts
04/02 2.14-01 BEDIENUNGSANLEITUNG , Seite / page 17 TTX 207 – Da Capo Interne Fonts / Internal fonts... - Page 19 04/02 2.14-01 BEDIENUNGSANLEITUNG , Seite / page 18 TTX 207 – Da Capo...
- Page 20 04/02 2.14-01 BEDIENUNGSANLEITUNG , Seite / page 19 TTX 207 – Da Capo...
-
Page 21: Interne Barcodes / Internal Bar Codes
04/02 2.14-01 BEDIENUNGSANLEITUNG , Seite / page 20 TTX 207 – Da Capo Interne Barcodes / Internal bar codes... -
Page 22: Index
04/02 Rev. 2.15-01 MANUAL Setup, operation, service, page 22 TTX 207 – Da Capo Index Ambient conditions Mains Frequency voltage Bar codes Maintenance and care Blink-Codes der gelben LED Material guiding parts, cleaning Material Stock Character modification Memory Copyright Noise...
Need help?
Do you have a question about the TTX 207 and is the answer not in the manual?
Questions and answers