Dc Connection (From Pv Array) - Delta RPI-H3 Owner's Manual

The AC voltage should be as following.
L-N: 230 Vac± 10

5.3 DC Connection (from PV Array)

!
WARNING !
When doing DC wiring, please choose the proper wiring by
connect to the correct polarity.
When doing DC wiring, please confirm that PV Array's power
switch is off.
CAUTION !
!
◆ The maximum open circuit voltage of PV Array must not
exceed 550V (RPI-H3) / 1000V (RPI-H5).
◆ The recommended PV power connect to inverter is 3600W
Figure 5-3 AC plug illustration
17