Inverter Setting; Country Setting; Ac Configuration Setting - Delta RPI-H3 Owner's Manual

7.2 Inverter Setting

7.2.1 Country Setting

The first time you startup this device. Country Setting is required.
1. In the country setting page, press "SEL" button (NEXT) to select your
located country, press "ENT" button to confirm this page.
2. Press "Enter" button to confirm your country setting.
NOTE:

7.2.2 AC Configuration Setting

1. Turn on DC power and wait for the LCD display is ready, then press "SEL"
button until "Country XXX" is displayed.
2. Press and hold both "SEL" and "ENT" buttons for 10 seconds until
"Language XXXXXX" is shown.
3. Press "SEL" until "AC Configurat. XXXXXX" is shown.
4. Press "ENT" to enter AC Configuration Setting page
between two types of configuration
press "ENT" to confirm the setting.
Figure 7-1 Country Setting
.
As your type of configurations is displayed,
26
,
press "SEL" to flip