B–8
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Step 2. Disconnect the Terminal from the Connector.
Example:
Press Down
B
Reference:
Reference:
1~2
for 1.0III KITCUT Type
24
1.
Disconnect Connector
To pull apart the connectors, pull on the connector itself,
not the wire harness.
HINT:
disconnecting before pulling apart.
Press down type is mainly used.
Press Down
2.
Prepare the Special Tool
HINT:
construct and use the special tool or like object shown on
the left.
(mm)
1
(mm)
Wire Harness Repair Manual (RM1022E)
Check to see what kind of connector you are
Pull Up
To remove the terminal from the connector, please
Pull Up