B–16
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Example:
Access hole
32
Temporary Lock Position
[Male]
Wire Harness Repair Manual (RM1022E)
(1)
Insert the special tool into the terminal retainer
access hole ( Y Mark) and pull the terminal retainer
up to the temporary lock position.
HINT:
The needle insertion position varies according to
the connector's shape (Number of terminals etc.), so check
the position before inserting it.
Terminal Retainer at
Full Lock Position
HINT:
In some cases insert the special tool from the
access hole on the flank of the housing.
[Female]