Hole Plug/Terminal Packing; Sleeve - Toyota Automobile Electrical Repair And Modification

B–6
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Hole Plug
Connector Body
Terminal
Packing
B
Small (Red)
Medium (Blue)
Large (Yellow)
Wire Outside
Diameter
0.2–1.0 mm
1.0–2.0 mm
3.0–5.0 mm
Wire Outside Diameter
Insulation
22
3.
4.
Sleeve Size
(Color)
Small (Red)
Medium (Blue)
Large (Yellow)
Calipers
Wire Harness Repair Manual (RM1022E)

Hole Plug/Terminal Packing

(a) Identify the part number of the appropriate terminal
with wire/connector body from the illustrations of
waterproof type connector according to the
above–mentioned 1 and 2.
(b) Identify the part number of the hole plug/terminal
packing from the corresponding illustration.

Sleeve

When connecting two wires using a sleeve, select the
sleeve according to the following table.
(a) When size is based on the outside diameter of the
wire.