Terminal With Wire - Toyota Automobile Electrical Repair And Modification

B–4
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Step 1. Identify the connector and the terminal type.
Confirm whether the connector you require is the non–waterproof, waterproof or combined terminal type
connector from the pictures provided in the following charts.
Non–Waterproof Type
Waterproof Type
Combined Terminal Type
B
20
Connector
1.
Wire Harness Repair Manual (RM1022E)
Those connectors which are not of the
waterproof or combined terminal type.
Waterproof material (hole plug or terminal
packing) is provided on the terminal/connector
body.
Terminals of different shape/size are located in
one connector.

Terminal with Wire

Identify the part number of the terminal with wire by picking
out the corresponding illustration from the pictures
provided on the following charts.
HINT: In some of the illustrations, there are two part
numbers for the same illustration of terminal with wire,
because although the shapes of the terminals are
completely the same, there is a difference in with /without
gold–plating (gilded).
Remark: The length of the wire connected to the
terminal is approximately 150 mm.
Description