Table of Contents
Advertisement
B–10
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Raise Up
Terminal Retainer
Terminal Retainer
B
[Retainer at Full Lock Position]
Stopper
[Retainer at Temporary Lock Position]
Good
26
Special
Tool
Terminal
Retainer
Bad
[Male]
Wire Harness Repair Manual (RM1022E)
Type A (For 0.64II, 0.64III, 1.0II, 1.8, 2.3II, 4.8 and 8.0 of
Non–Waterproof Type Connector)
(1)
Using the special tool, raise the retainer up to the
temporary lock position.
HINT:
The needle insertion position varies according to
the connector's shape (number of terminals, etc.), so
check the position before inserting it.
Good
Bad
[Female]
Hide quick links:
Advertisement
Table of Contents
