TERMINAL AND CONNECTOR REPAIR–PREPARATORY ITEMS
PREPARATORY ITEMS
Crimping tool
Special tool
Tool
Tool
SST
SST
Gauge
Caliper
Press sleeve
Others
Others
Silicon tape
Reference:
AMP Part No. 169060
Refer to the following illustration
09991–00500
09992–01030
0–150 mm
82999–12010 (Red)
82999–12020 (Blue)
82999–12030 (Yellow)
08231–00045
Special Tool
HINT:
To remove the terminal from the connector, please
construct and use the special tool or like object shown on
the left.
(mm)
Preparation of the SST to release the 0.64 connector terminal.
SST 09991–00500
HINT:
This is a SST for releasing terminals from 0.64 connectors.
Preparation of the SST to release the 0.64 II connector terminal.
SST 09992–01030
HINT:
This is a SST for releasing terminals from 0.64 II
connectors.
Wire Harness Repair Manual (RM1022E)
B–1
For caulking press
sleeves
To remove the
terminal
To remove the 0.64
connector terminal
To remove the 0.64 II
connector terminal
To measure the
diameter of the core
To connect wires
To waterproof the
connected section
B
17