Selecting The Right Paper - Kyocera ECOSYS P2135dn Operation Manual

2-4

Selecting the Right Paper

This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn,
embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper
jams, and can shorten the life of the machine. In particular, avoid using
paper with a surface coating or other surface treatment. Paper should
have as smooth and even a surface as possible.
Composition
Do not use paper that has been surface-treated and contains plastic or
carbon. The heat of fusing can cause such paper to give off harmful
fumes.
Bond paper should contain at least 80% pulp. Not more than 20% of the
total paper content should consist of cotton or other fibers.
Paper Sizes
Cassettes and the MP Tray are available for the paper sizes shown
below. The dimensional tolerances are ±0.7mm for the length and width.
The angle at the corners must be 90° ±0.2°.
MP Tray Only Size
Env. Monarch 3-7/8 × 7-1/2 inches Legal
Envelope #10 4-1/8 × 9-1/2 inches Letter
Envelope #9 3-7/8 × 8-7/8 inches ISO A4
Envelope #6 3-5/8 × 6-1/2 inches ISO A5
Envelope DL 110 × 220 mm
JIS B6 128 × 182 mm
Hagaki 100 × 148 mm
OufukuHagaki 148 × 200 mm
Youkei 2 114 × 162 mm
Youkei 4 105 × 235 mm
Cassette: 105 to 216 mm × 148 to 356 mm
Custom
MP Tray: 70 to 216 mm × 148 to 356 mm
Cassette or
MP Tray
ISO A6
Envelope C5
ISO B5
JIS B5
Statement
Executive
Oficio II
Folio
16 kai
216 × 340 mm 216 × 340 mm
(4-1/8 to 8-1/2 inches × 5-13/16 to 14 inches)
(2-3/4 to 8-1/2 inches × 5-13/16 to 14 inches)
Size
8-1/2 × 14 inches
8-1/2 × 11 inches
210 × 297 mm
148 × 210 mm
105 × 148 mm
162 × 229 mm
176 × 250 mm
182 × 257 mm
5-1/2 × 8-1/2 inches
7-1/4 × 10-1/2 inches
8-1/2 × 13 inches
210 × 330 mm
197 × 273 mm
Paper Handling