Table of Contents
Advertisement
26
Correct sequence printout
If more than one document is transmitted, it is normal to start with the first page. As received copies are
printed out face-up, this means that the received stack of documents is in reversed order. This would mean
that the first page is the last page to be printed.
Please note that the entire reception procedure is first stored in memory before it is subsequently printed out. If
the capacity of the memory is not sufficient, there will be a delay in printing out the documents in the correct
sequence.
. . . . .
STOP
Delete reception
It is not possible to immediately recognise whether your fax machine is transmitting or receiving a document.
The BUSY lamp does not distinguish between these two modes. You can only identify that a document is being
received after you press the JOB STATUS key.
BUSY
JOB STATUS
JOB CANCEL
START
15-03
19:56
100%
AUTO RECEIVE
MENU
1.FAX FEATURES
REV. ORDER PRINT
1.ON
15-03
19:56
100%
AUTO RECEIVE
RECEIVE
P001
+44 2131 123456
CANCEL?
1.YES
Standby mode
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
1. Correct sequence printout ON
2. Correct sequence printout OFF
Select a menu item
Press STOP , return to standby mode
Standby mode
The BUSY lamp flashes to indicate activity
on the line
Press the JOB STATUS key
The current status is displayed
(RECEPTION is displayed)
Press the JOB CANCEL key
Confirmation prompt
...confirm with START
Current reception is terminated
Advertisement
Table of Contents
