Table of Contents
Advertisement
Set transmission header position
The transmission header contains the code, the name, time of transmission and the current page number.
Normally it appears in the top 5 mm of the incoming copy. If this area contains important information this
information is overwritten by the transmission header. In order to prevent this from happening, you are able to
displace the transmission header. Accordingly, the transmission header is first printed before the copy is
printed. However, this results in the copy received by the receiving fax machine being approx. 5 mm longer.
. . . . .
STOP
Reception trailer (RTI)
You can activate the reception trailer facility to ensure that reception of a document is precisely documented.
The RTI is printed at the bottom of the incoming copy, and contains the current reception data such as time and
date of reception as well as the IDs of the transmitter and receiver.
Please note that, when the reception trailer is activated, the inbound fax is always reduced before being
printed out.
. . . . .
STOP
15-03
19:56
100%
AUTO RECEIVE
MENU
1.FAX FEATURES
TTI
1.INSIDE
15-03
19:56
100%
AUTO RECEIVE
MENU
1.FAX FEATURES
RTI
2.OFF
Standby mode
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
for transmission header position
1. INSIDE
2. OUTSIDE
Select a menu item
Press STOP , return to standby mode
Standby mode
Start the menu
The first menu item is displayed
Select a menu item
Make your selection
for reception trailer
1. Reception with trailer
2. Reception without trailer
Select a menu item
Press STOP , return to standby mode
95
Advertisement
Table of Contents
