Table of Contents
Advertisement
Remove transport fittings:
Before you start to use your fax machine, please remove all transport fittings.
Preparing and installing printer components
In order to prevent any transport damage, the high-quality printer unit of your new fax machine is supplied with
the additional protection of special packaging. Please also follow the enclosed instructions.
The printer unit consists of two separate components, namely the drum unit and the developer assembly.
Remove these two parts from their packaging and follow the following instructions.
1. Open the fax machine by
pressing the release button.
2. Grasp the drum unit by the
green grip and insert it into the
corresponding guide in the fax
machine. Please pay particular
attention to the different colour-
coded markers „1". The colour
and number on the drum unit
must correspond to the colour-
coding and number on the fax
machine. Insert the drum unit
as it will go into the fax
machine.
3. Securely grasp the developer
assembly by the green grip and
shake it a few times to the left
and right to loosen the toner.
4. Position the developer assembly
in such a way that the markers
„2" match the corresponding
points on the fax machine in
terms of colour and position.
Subsequently slide the developer
assembly into the fax machine.
Only exert light pressure from
above on the green grip,
following the movement of the
grip without resistance. This
should result in the developer
assembly being correctly
positioned.
5. Close the cover of the fax
machine, which must audibly
click into place.
7
Advertisement
Table of Contents
