Table of Contents
Advertisement
Print transmission report on document (TX Report)
You have the possibility of printing the transmission report on the reverse side of the document via the single-
sheet feed.
Please note that the buffer memory
are nevertheless stored in the buffer memory, press the "DIRECT SEND" key
buffer memory.
TX REPORT
(see page
33) must be empty for this procedure. If other transmission jobs
15-03
19:56
100%
AUTO RECEIVE
TX-REPORT
1.ALWAYS
(see page
36) to avoid using the
Standby mode
Load original
Remember:Printed side face down
Selecting the desired TX report output
(for the current job)
1. Transmission report - Always
Send Fax
- After scanning the document -
• Remove document from document
tray.
• Place document face down in the
single-sheet feed.
• Wait until fax transmission is finished.
• Transmission report is printed on the
reverse side of the document.
51
Advertisement
Table of Contents
