Receiving Documents; Reception Modes - Toshiba e-studio50f Operator's Manual

Receiving Documents

Reception Modes

You can select one of the four modes as shown below.
Conditions
You normally receive
only voice calls.
You receive both voice
and fax calls.
You normally receive
fax calls only.
You receive both voice
and fax calls. And a
Telephone Answering
Machine (TAM) is
connected.
1 Depending on the model of the Telephone Answering Machine (TAM) that is connected, some
NOTE
of the features may not be compatible with your fax machine operating in the TAM Interface
mode.
2 If you are using the "Distinctive Ring Service" provided by your local telephone company,
please note that the ring pattern for your fax number must match with the setting of Fax
Parameter No. 30 (DRD SERVICE). (See page 36)
If the setting does not match with the ring pattern, your machine will not receive a document
automatically and the telephone will continue to ring.
Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not
function properly in TAM Interface.
3 Fax / Tel Auto Switching Mode and TAM Interface Mode is not available for some countries.
Suggested Reception Mode
Telephone Mode
You can answer the incoming call via an External
Telephone (Optional). If you receive a fax calling
signal, simply press
START
(See page 60)
Fax / Tel Auto Switching Mode (See Note 3)
Unit will answer the incoming call then distinguishes
whether it is voice or fax call. If it is a fax call, the unit will
receive automatically. If it is a voice call, the unit will
signal (ring) through the speaker for your attention.
(See page 61)
Fax Mode
Unit will receive the document automatically. All
incoming calls (including a voice call) are
answered by the fax machine.
TAM Interface Mode (See Note 3)
The TAM answers the incoming call. During that
time, the unit also monitors whether it is a voice
call, the TAM continues to operate. If it is a fax call,
the unit will automatically switch the line to the Fax
and begin receiving document.
Fax Parameter No. 17 set to 1: Tel
to receive manually.
Fax Parameter No. 17 set to 3:
Fax / Tel SW.
Fax Parameter No. 17 set to 2:
Fax
(See page 62)
Fax Parameter No. 17 set to 4:
TAM I/F.
(See page 63)
Settings
59