5025-2xx, 4xx
Waste toner bottle contact block removal
See the on
"Waste toner bottle contact block" on page 7-9
Open the front cover.
1.
Remove the right cover assembly. See
2.
Remove the waste toner bottle. See
3.
Remove the screw (A) from the back of the waste toner bottle contact block.
4.
Remove the rear shield. See
5.
Disconnect the waste toner bottle contact block cable (B) from the controller board.
6.
Remove the waste toner bottle contact block.
7.
Service Manual
4-82
for the part number.
"Right cover assembly removal" on page
"Waste toner bottle removal" on page
"Top cover assembly removal" on page
4-12.
4-81.
4-13.
Previous
Next
Go Back