Toner cartridge contacts
See
"Toner cartridge contacts (Pogo pin)" on page 7-9
Remove the right cover assembly. See
1.
Remove the waste toner bottle. See
2.
Remove the imaging unit. See
3.
Remove the rear shield. See
4.
5.
Remove the rear screw (A) in the waste toner bottle sensor contact to allow access to the cable cover.
Note: The waste toner bottle sensor contact does not need to be unplugged or removed.
Remove the four screws (B) securing the cable cover, and remove the cable cover.
6.
7.
Rotate the printer to view the right side.
Remove the screw (C) securing the spring contacts.
8.
Release the tabs (D) on the spring contact to release the spring contacts.
9.
for the part number.
"Right cover assembly removal" on page
"Waste toner bottle removal" on page
"Imaging unit (IU) removal" on page
"Top cover assembly removal" on page
5025-2xx, 4xx
4-12.
4-81.
4-49.
4-13.
Repair information
Previous
Next
Go Back
4-71