5025-2xx, 4xx
Printer Setup
Defaults
US/Non-US defaults changes whether the printer uses the US factory defaults or the non-US factory defaults.
The settings affected include paper size, envelope size, PCL symbol set, code pages, and units of measure.
Warning: Changing this setting resets the printer to factory defaults, and data may be lost. It cannot be undone.
To change the Defaults:
1.
Select Printer Setup from Diag Menu, and press Select (
Select Defaults, and press Select (
2.
Select U.S. (default) or Non-U.S., and press Select (
3.
)
Press Back (
Page counts
You can view but not change any of the three counts.
To view the Prt Color Pg Count, the Prt Mono Pg Count, or the Perm Page Count:
Select Printer Setup from Diag Menu, and press Select (
1.
Select the page count you wish to view:
2.
•
Prt Color Pg Count
•
Prt Mono Pg Count
•
Perm Page Count
Press Select (
3.
The value of the page count displays.
)
Press Back (
Serial Number
The serial number can only be viewed, but cannot changed.
To view the serial number:
Select Printer Setup from Diag Menu, and press Select (
1.
Select Serial number, and press Select (
2.
The Serial Number is displayed.
)
Press Back (
Engine Setting 1 through 4
Do not change these settings unless requested to do so by your next level of support.
Warning:
Model Name
The model name can only be viewed and cannot be changed.
Service Manual
3-18
).
to return to Printer Setup.
).
to return to Printer Setup.
to return to Printer Setup.
).
).
).
).
).
Previous
Next
Go Back