Lexmark C540n Service Manual page 218

5025-2xx, 4xx
Remove the three screws (B).
4.
Remove the printhead.
5.
Installation note:
When the printhead is replaced, perform the registration (black planes) and alignment (color planes). See
•
"Registration" on page 3-4
Be sure to replace the toroid on the cable when you reinstall the printhead, and push the toriod between
•
the connector and the top frame so that the weight is not supported by the cable.
Service Manual
4-70
and
"Alignment" on page 3-7.
Previous
Next
Go Back