Table of Contents
Advertisement
VBOX 3iSL User Guide
Logging
A VBOX 3iSL has three Logging modes that are selected and configured via VBOX setup with the supplied VBOXTools software
Logging Modes
Log Continuously:
With „Log Continuously‟ ticked the VBOX will log data, regardless of movement.
Log Only when moving:
Without „Log Continuously‟ ticked then the VBOX will only log data to the CF card when it detects speed >0.5Km/h.
Advanced:
The advanced logging option on a VBOX 3iSL allows any of the logged data channels to be used to trigger the logging on the VBOX.
This is selected and configured through VBOX setup of the supplied VBOXTools software.
This facility allows a threshold value to be set as either > or < so that the logging will start or stop when a data value is exceeded or not.
Multiple Data channels can be combined in a Boolean „OR‟ manner to control the logging.
01/12/2011
Page 16 of 49
Advertisement
Table of Contents
