Transmission Report; Starting The Initial Installation; Checking The Firmware Version - BELGACOM Belgafax 180s User Manual

Printing Transmission Report
Printing Transmission Report
After every transmission, the machine prints out a
transmission report. If a transmission error occurs, an
error report is printed out. You can switch off printing
of the transmission report.
1 Press OK, 36 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
Printing Help Pages
Help 1 · Overview
Press î and 1 to print an overview of the help
pages.
Help 3 · Telephone Functions
Press î and 3 to print an overview of the telephone
book functions.
Help 4 · Fax Transmission
Press î and 4 to print instructions for sending fax
messages and for configuring the fax switch.
Help 5 · Copier
Press î and 5 to print the help for copying.
Help 6 · Function List
Press î and 6 to print a list of all functions and
settings of your machine.
Help 7 · Games and Fun
Press î and 7 to print the instructions for the
Games and Fun functions of your device.
Help 8 · SMS
Press î and 8 to print the instructions for SMS
functions (depending on the model).

Starting the Initial Installation

1 Press î and 2.
2 The machine prints out a help page and starts the
initial installation process.

Checking the Firmware Version

1 Press OK, 47 and OK.
2 The model designation and the configured country
appear on the display.
3 Confirm with OK.
4 The information on the firmware version of the
machine is displayed.
5 Confirm with OK.
22