Attaching The Document Holder; Connecting Handset; Connecting The Telephone Cord; Connecting The Power Cord - BELGACOM Belgafax 180s User Manual

Attaching the document holder

Attaching the document holder
Insert the additional document holder on the document
feeder. You can remove the additional document holder
after sending fax or copying and close the cover again.
Dokumentenhalter aufstecken

Connecting handset

Connecting the Handset
Plug one end of the spiral cable into the socket on
the telephone handset. Insert the other end into the
socket designated with the ) symbol.
Hörer anschließen

Connecting the Telephone Cord

Connecting the Telephone Cable
Connect the telephone cord to the device by inserting
it in the socket designated with LINE (RJ-11-Connec-
tor). Insert the telephone plug into your telephone
connection socket.
Telefonkabel anschließen
Extension
If you connect your device as extension to a tel-
ephone system, you must set it for working as
an extension (also see Chapter "Telephone con-
nections and additional devices, page 23).

Connecting the Power Cord

Power Type at Setup Location
Check whether the power type of your machine
(indicated on the type plate) matches the power
type available at the setup location.
Connecting the Power Cable
Insert the power cable into the connection located on
the rear side of the machine. Connect the power cable
to the electrical socket.
Netzkabel anschließen

Initial installation

Starting the Initial Installation
After you connect your device to the mains, the initial
installation commences. Press î. Your device prints a
help page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Entering Your Number
Header
Your name and number are added together with date,
time and page number at the top edge of each fax
transmission (= header).
Entering Your Number
1 Enter your number. Using # or * you can enter
a plus sign.
2 Confirm using OK.
Entering name
1 Enter the name using the letter keypad. Enter cap-
ital letters by pressing and holding + button. You
can delete individual characters using \. You can
enter a space using ½. Press CTRL and the re-
spective letter key to enter the special character
printed on it.
You can move the cursor using [. Use C
to delete individual characters.
2 Confirm using OK.
Print list of functions
After entering the device prints an overview of the
functions.
Entering the Time and Date
Entering Time/Date
1 Enter the time, e.g. 1400 for 2 pm.
2 Enter the date
080607 for 8 June 2007.
3 Confirm with OK.
Help 2 · Initial Installation Process
You can restart the initial installation process any
time. Press î and 2.
(two digits each) e.g.
5