BELGACOM Belgafax 180s User Manual page 29

Table of Contents

Advertisement

General information
The time and date flash on the display.
Problems when faxing or printing
Faxes sent are of poor quality.
The device produces black lines when sending or print-
ing.
Copy is blank.
Printing is interrupted.
No printing
Documents are not properly fed.
Problems with the connection
The device rings once, remains silent for a short while
and starts ringing again.
No dial tone
Fax transmissions are constantly interrupted.
You hear a whistling tone or silence in the handset.
No fax reception
You must check the time and date after a short power
failure. Confirm using OK.
Change the resolution from RESOL.: STANDARD to
RESOL.: FINE or RESOL.: PHOTO .
Change the contrast.
Clean the scanner.
Test the device by making a copy of the document.
If the device is in order, the fax machine of the re-
cipient is defective.
Clean the scanner and the document feed slot.
Insert the documents face up into the document feeder.
Paper or document jam, no paper or ink film. Follow
the instructions on the display and in the error report.
There could be a small pause after printing several pag-
es. The device continues printing automatically.
Check if you have inserted clamped paper correctly.
The lever on the right hand side next to the paper
feeder must be folded backwards.
Clean the scanner.
This is absolutely normal. The fax switch checks the
call after the first ring. If it is a voice call, the device
continues to ring.
Check the installation of the device. Connect the tel-
ephone cable to the socket marked LINE. Insert the
telephone plug into your telephone connection socket.
Try to send the fax manually: Press l and dial the
number. If the recipient is using an answering machine,
wait until you hear a whistling tone. Press o.
It is possible that the recipient's machine is not ready
to receive.
The call is a fax: Press o on the device. In addition,
press *5 on the telephone. Hang up.
Using function 51, set the number of rings (see page
21).
You cannot simultaneously use the PhoneMail function
and receive faxes (see page 23).
29

Advertisement

Table of Contents
loading

Table of Contents