Toshiba PORTEGE A200 series Maintenance Manual page 219

4.6 Keyboard
5. Remove the keyboard flexible cable from the connector PJ3230 on the system board.
6. Remove the keyboard.
Keyboard flexible cable
PJ3230
Installing a keyboard
The following describes the procedure for installing a keyboard. (See Figure 4-6 to 4-8.)
1. Set the keyboard on the palm rest with the back up and connect the keyboard flexible
cable to the connector PJ3230 on the system board.
2. Turn the keyboard face up and set it while inserting the latches under the palm rest.
3. Fix the keyboard with the following screws .
?
4. Hook the latches at the back of the keyboard holder first and push down the front side
of the keyboard holder.
PORTEGE A200 Maintenance Manual (960-499)
Figure 4-8 Removing the keyboard (2)
M2? 3S S-THIN HEAD screw
4 Replacement Procedures
? 3
4-15