Wireless Lan Module - Toshiba PORTEGE A200 series Maintenance Manual

4 Replacement Procedures

4.11 Wireless LAN module

Removing the wireless LAN module
To remove the wireless LAN module, perform the following procedure. (See Figure 4-17.)
1. Peel off the glass tape on the wireless LAN antenna cables.
2. Remove the white and black antenna cables from the wireless LAN module using a
dedicated jig.
3. Open the latche s fixing the wireless LAN module and remove the wireless LAN
module.
Installing a wireless LAN module
To install a wireless LAN module, perform the following procedure. (See Figure 4-17.)
1. Insert the wireless LAN module into the connector of the computer slantwise.
2. Push down the wireless LAN module until it is latched firmly.
4-26
Latch
Figure 4-17 Removing the wireless LAN module
4.11 Wireless LAN module
Glass tape
Antenna cable (white)
Antenna cable (black)
Wireless LAN module
PORTEGE A200 Maintenance Manual (960-499)