Toshiba PORTEGE A200 series Maintenance Manual page 264

4.25 Hinge assembly
3. Take both the hinge assemblies out from the holes of the base.
M2.5?4B FLAT HEAD
Hinge assembly
Figure 4-49 Removing the hinge assembly (base side)
Installing a hinge assembly
To install a hinge assembly, perform the following procedure. (See Figure 4-48 and 4-49.)
1. Fix the hinge assemblies to the LCD cover with the following screws.
?
?
2. Fix the hinge assemblies to the base with the following screws.
?
Caution: When fixing the hinge assembly, use new screws and apply Locktight to them.
PORTEGE A200 Maintenance Manual (960-499)
M2.5? 6 Tapping screw
M2.5? 4B FLAT HEAD
M2.5? 4B FLAT HEAD
4 Replacement Procedures
Hinge assembly
M2.5?4B FLAT HEAD
? 2 (left? 1, right? 1)
? 2 (left? 1, right? 1)
? 4
4-59