Rtc Battery - Toshiba PORTEGE A200 series Maintenance Manual

4.16 RTC battery

4.16 RTC battery
Removing the RTC battery
To remove the RTC battery, perform the following procedure. (See Figure 4-25.)
1. Peel off the glass tape and disconnect the RTC battery cable from the connector
PJ8760 on the system board.
2. Remove the RTC battery and cushion.
RTC battery
GND pattern
Installing a RTC battery
To install a RTC battery, perform the following procedure. (See Figure 4-25.)
1. Connect the RTC battery cable to the connector PJ8760 on the system board.
2. Set the RTC battery and cushion into the slot and put the RTC battery cable into
the space between the fan and system board.
3. Stick the glass tape .
Caution: Be careful not to stick the glass tape on the GND pattern.
PORTEGE A200 Maintenance Manual (960-499)
Cushion
Figure 4-25 Removing the RTC battery
4 Replacement Procedures
Glass tape
RTC battery cable
PJ8760
4-35