Toshiba PORTEGE A200 series Maintenance Manual page 262

4.24 Wireless LAN antenna
2. Peel off the one acetate tape and four insulators and take out the wireless LAN
antenna cables from the hinge hole.
Figure 4-47 Removing the wireless LAN antenna cable
Installing a wireless LAN antenna
To install a wireless LAN antenna, perform the following procedure. (See Figure 4-46 and 4-
47.)
1. Pass the wireless LAN antenna cables through the hinge hole and lay down the
cable in place. Fix the wireless LAN antenna cables with the one acetate tape and
four insulators .
2. Stick the wireless LAN antennas on the LCD cover in place and fix the antenna
cables with the acetate tapes at four points.
Caution: When installing antenna cables, do not cross them on the LCD cover.
PORTEGE A200 Maintenance Manual (960-499)
4 Replacement Procedures
Insulator
Acetate tape
Wireless LAN antenna
cable
4-57