Toshiba PORTEGE A200 series Maintenance Manual page 191

3.30 SETUP
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE
RPL Sets to RPL protocol.
6. Display
This option configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD + Analog RGB
Note: When LCD + Analog RGB is selected while connecting the external display not
corresponding to SVGA mode, no image appears on the display.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
(c) TV type
Selects TV type.
NTSC (JAPAN) for Japan
NTSC (US)
PAL
PORTEGE A200 Maintenance Manual (960-499)
: When HDD occurs in the boot priority in the following order:
PC card and built-in HDD.
Sets to PXE protocol. (Default)
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external CRT for
simultaneous display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
for US
for Europe
3 Tests and Diagnostics
3-93