Toshiba PORTEGE A200 series Maintenance Manual page 174

3 Tests and Diagnostics
Error code
Table 3-7 Error code for Bluetooth test (BD_ADDR of the DUT) (1/2)
Error code
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0a
0x0b
0x0c
0x0d
0x0e
0x0f
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1a
0x1b
0x1c
0x1d
0x1e
0x1f
** See the Specification of the Bluetooth System in detail.
3-76
3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program
Unknown HCI Command.
No Connection.
Hardware Failure.
Page Timeout.
Authentication Failure.
Key Missing.
Memory Full.
Connection Timeout.
Max Number Of Connections.
Max Number Of SCO Connections To A Device.
ACL Connection already exists.
Command Disallowed.
Host Rejected due to limited resources.
Host Rejected due to security reasons.
Host Rejected due to remote device is only a personal device.
Host Timeout.
Unsupported Feature or Parameter Value.
Invalid HCI Command Parameters.
Other End Terminated Connection: Used Ended Connection.
Other End Terminated Connection: Low Resources.
Other End Terminated Connection: About to Power Off.
Connection Terminated by Local Host.
Repeated Attempts.
Paring Not Allowed.
Unknown LMP PDU.
Unsupported Remote Feature.
SCO Offset Rejected.
SCO Interval Rejected.
SCO Air Mode Rejected.
Invalid LMP Parameters.
Unspecified Error.
Meaning
PORTEGE A200 Maintenance Manual (960-499)